Apatent application was made in 1981 for the earth shattering invention of "the original – LUX ELEMENTS® hard foam support ELEMENT".
The construction panel for walls and floors LUX ELEMENTS®-ELEMENT
The installation cladding LUX ELEMENTS®-TEC
Bath surrounds LUX ELEMENTS®-TOP
The washstands LUX ELEMENTS®-LAVADO
Point drainage LUX ELEMENTS TUB®
Linear drainage LUX ELEMENTS TUB-LINE®
Individual relaxation and distraction LUX ELEMENTS®-RELAX
The decorative elements LUX ELEMENTS®-DECO
Individual room constructions LUX ELEMENTS®-CONCEPT
The tried and tested accessories are fully harmonised for processing ELEMENT. Specially developed adhesives and mortars, sealing tapes, mounting angles and plugs ensure problem-free processing.
Fastening set and dowels LUX ELEMENTS®-FIX
Technical fixtures, Heating, Lighting and Sound LUX ELEMENTS®-ADD
Adhesives LUX ELEMENTS COL®
Sealing filler and sealing tapes LUX ELEMENTS®-DRY
Reinforce LUX ELEMENTS ARM®
Mounting aids LUX ELEMENTS MONT®
LUX ELEMENTS®-...-PLUS Individual, special manufacture for each product group
In addition to standard products, also individually tailored and specially manufactured products are available for the products groups listed under the designation ‘PLUS‘.
Sizes, shapes, thicknesses etc., that deviate from standard features can be inquired from LUX ELEMENTS. After successful verification of implementation possibility at LUX ELEMENTS an appropriate offer will be prepared. Once an order is placed, it will be manufactured and delivered accordingly.
Overview of All Issues
LUX ELEMENTS GmbH & CO KGAn der Schusterinsel 7D - 51379 Leverkusen-OpladenTelefon +49 (0) 21 71/ 72 12 - 0Telefax +49 (0) 21 71/ 72 12 40
Construction & design
Current trade fair dates
We recommend horizontal laying for ELEMENT-VK on the wall.
Before attaching, if possible, position the alignment markings on the floor and ceiling. Then press on the ELEMENT with the level and spirit level and check not only the individual and reciprocal vertical and horizontal alignment of the ELEMENT construction panels.
Additionally dowel with FIX-FID or FIX-KSD. Pay attention when dowelling to water and power lines! Before applying the adhesive, pre-pierce the holes for the dowels with a cross slot screwdriver.
Seal the dowel pin heads using a small piece of sealing tape DRY-DBV and DRY-ASK. DRY-ASK is applied using a brush or spatula. Gluing of the cut-to-size sealing tape takes place using DRY-ASK. Then level out using DRY-ASK.
Sealing of the joints using sealing tape DRY-DBV and DRY-ASK. DRY-ASK is applied using a brush or spatula. Gluing of the sealing tape takes place using DRY-ASK. In the second step the joint is levelled out using DRY-ASK.
© 2022 All rights reserved. We reserve the right to make technical changes.Status: Oct 27,2022
LUX ELEMENTS GmbH & CO KGAn der Schusterinsel 7D - 51379 Leverkusen-OpladenGermanyTelefon +49 (0) 21 71/ 72 12 - 0Telefax +49 (0) 21 71/ 72 12 40