Shower base for alternative water-resistant coatings – TUB-PL-S

TUB-PL-S are hard foam shower base elements with a higher compressive strength for accepting alternative, water-resistant coatings.

TUB-PL-S
Hard foam shower base elements with a higher compressive strength


See also:
TUB-PL-B - for alternative water-resistant coverings

 

Dimensions

These shower bases are available in four standard formats or made to measure.

Drain system

The matching drainage technology consists of the TUB-RA-A grate fitting frame, including a standard stainless steel grate, and a vertical or horizontal floor drain support.

  1. TUB-PL-B BAW
    Floor drain support DN 50 horizontal, with odour trap
  2. TUB-PL-B BAS
    Floor drain support DN 50 vertical, with odour trap

 

  1. TUB-BA-S 100
    Floor drain support DN 40/DN 50 vertical, for 100 mm core drill hole, with odour trap

Easy cutting

  1. TUB-RA-A
    Grate fitting frame, including a standard stainless steel grate 120 x 120 mm, overall height 85 mm.

  2. Universal height adjustment to coatings from 2–3 mm possible.

Product specifications

Shower receptor units LUX ELEMENTS - TUB >= 1200 x 1200 mm
DIN CERTO - P1B036 (1008 KB)

Shower receptor units LUX ELEMENTS - TUB >= 1500 x 1500 mm
DIN CERTO - P1B037 (1013 KB)


Before printing a pdf file, please check if this is really necessary. Environmental protection concerns us all.

To view the PDF documents you will need either the Acrobat Reader or a PDF-Viewer, both available free of charge. Using these programs the PDF documents can be opened, viewed and printed.