Apatent application was made in 1981 for the earth shattering invention of "the original – LUX ELEMENTS® hard foam support ELEMENT".
The construction panel for walls and floors LUX ELEMENTS®-ELEMENT
The installation cladding LUX ELEMENTS®-TEC
Bath surrounds LUX ELEMENTS®-TOP
The washstands LUX ELEMENTS LAVADO®
Point drainage LUX ELEMENTS TUB®
Linear drainage LUX ELEMENTS TUB-LINE®
Further areas of application LUX ELEMENTS TUB®
Individual relaxation and distraction LUX ELEMENTS®-RELAX
Prefabricated room constructions LUX ELEMENTS®-MODUL
The decorative elements LUX ELEMENTS®-DECO
Individual room constructions LUX ELEMENTS®-CONCEPT
The tried and tested accessories are fully harmonised for processing ELEMENT. Specially developed adhesives and mortars, sealing tapes, mounting angles and plugs ensure problem-free processing.
Fastening sets and dowels LUX ELEMENTS®-FIX
Adhesives LUX ELEMENTS COL®
Sealing filler and sealing tapes LUX ELEMENTS®-DRY
Reinforce LUX ELEMENTS ARM®
Mounting aids LUX ELEMENTS MONT®
LUX ELEMENTS®-...-PLUS Individual, special manufacture for each product group
In addition to standard products, also individually tailored and specially manufactured products are available for the products groups listed under the designation ‘PLUS‘.
Sizes, shapes, thicknesses etc., that deviate from standard features can be inquired from LUX ELEMENTS. After successful verification of implementation possibility at LUX ELEMENTS an appropriate offer will be prepared. Once an order is placed, it will be manufactured and delivered accordingly.
Construction panel ELEMENT on wooden floors
Construction panel ELEMENT on wooden stud frames
Construction panel ELEMENT on metal stud frame
Construction panel ELEMENT for wall levelling over existing tile covering
Construction panel ELEMENT for wall levelling on masonry
The construction panel ELEMENT as partition wall or room divider
Wash stands LAVADO with a "floating" design
Prefabricated niches RELAX-NI for integration into the wall
TEC pipe cladding for tiles or plaster
Cladding of wall-mounted constructions TEC-VWD
Overview of our YouTube-Videos
Overview of All Issues
LUX ELEMENTS GmbH & CO KGAn der Schusterinsel 7D - 51379 Leverkusen-OpladenTelefon +49 (0) 21 71/ 72 12 - 0Telefax +49 (0) 21 71/ 72 12 40
Point drainage –LUX ELEMENTS®-TUB
Appropriate floor drain system
Linear drainage –LUX ELEMENTS®-TUB-LINE
Appropriate floor drain system
Accessories –LUX ELEMENTS®- TUB/TUB-LINE
Further areas of applicationLUX ELEMENTS®-TUB
TUB-PUMP are hard foam shower base elements with integrated and sealed floor drain pump and an incorporated slope including 2 substrate elements.
TUB-PUMP MQ 900Shower base element, square with integrated and sealed-in floor drain pump
TUB-PUMP MQ 1200Shower base element, square with integrated and sealed-in floor drain pump
TUB-PUMP MRShower base element, rectangular with integrated and sealed-in floor drain pump
TUB-PUMP is available as standard in two square and two rectangular sizes.The two associated substrate elements in different heights offer flexibility for adaptation to different installation situations in the floor.
The floor drain pump has a capacity of 35 l/min (at 1,35 m height difference) and can be used wherever wastewater cannot reach the drainpipe by gravity flow. This can be the case, for example, in old buildings, in the attic or in the cellar.
Due to a float switch that starts the pump as soon as water hits the shower base, this is independent of the water supply through the pipe and even pumps away, for example, if you pour a bucket of water into the drain.
Please note: Informations about flow rate, see Datasheet TUB-PUMP
The 2-piece height-adjustable, reversible, stainless steel grate makes different design variants possible. One side has a stainless steel surface; the other can be tiled to match the shower base. By simply turning, the desired side faces upwards. In addition, the scope of delivery includes a further grate section with a sun-shaped pattern and an attachable stainless steel profile for covering the plastic frame.
The two associated substrate elements in different heights offer flexibility for adaptation to different installation situations in the floor.
TUB-PUMP is also available as LUX ELEMENTS®-TUB-PUMP-S with a floor drain pump with a lower installation height. For further information and technical data, please refer to the LUX ELEMENTS®-TUB-PUMP data sheet.
Please note: Dimensions in mm. Measures without adhesive coating and tiles.
Complete set mounting accessories on offer for all sizes of flush with the floor shower bases.
Shower receptor units LUX ELEMENTS - TUB >= 1200 x 1200 mm DIN CERTO - P1B036 (1008 KB)
Shower receptor units LUX ELEMENTS - TUB >= 1500 x 1500 mmDIN CERTO - P1B037 (1013 KB)
Before printing a pdf file, please check if this is really necessary. Environmental protection concerns us all.
To view the PDF documents you will need either the Acrobat Reader or a PDF-Viewer, both available free of charge. Using these programs the PDF documents can be opened, viewed and printed.
TUB Design grates made of stainless steel
Flush with the floor shower base TUB-PUMP with integrated floor drain pump
Flush with the floor shower bases TUB for the substitution of bathtubs
Extra-flat shower bases and channel support TUB-COMBI
Flush with the floor shower bases TUB-H on wooden floors
Flush with the floor shower bases TUB-LINE with channel drain
© 2017 All rights reserved. We reserve the right to make technical changes.Status: 19.05.2017
LUX ELEMENTS GmbH & CO KGAn der Schusterinsel 7D - 51379 Leverkusen-OpladenGermanyTelefon +49 (0) 21 71/ 72 12 - 0Telefax +49 (0) 21 71/ 72 12 40