Apatent application was made in 1981 for the earth shattering invention of "the original – LUX ELEMENTS® hard foam support ELEMENT".
The construction panel for walls and floors LUX ELEMENTS®-ELEMENT
The installation cladding LUX ELEMENTS®-TEC
Bath surrounds LUX ELEMENTS®-TOP
The washstands LUX ELEMENTS®-LAVADO
Point drainage LUX ELEMENTS TUB®
Linear drainage LUX ELEMENTS TUB-LINE®
Further areas of application LUX ELEMENTS TUB®
Individual relaxation and distraction LUX ELEMENTS®-RELAX
Prefabricated room constructions LUX ELEMENTS®-MODUL
The decorative elements LUX ELEMENTS®-DECO
Individual room constructions LUX ELEMENTS®-CONCEPT
The tried and tested accessories are fully harmonised for processing ELEMENT. Specially developed adhesives and mortars, sealing tapes, mounting angles and plugs ensure problem-free processing.
Fastening sets and dowels LUX ELEMENTS®-FIX
Adhesives LUX ELEMENTS COL®
Sealing filler and sealing tapes LUX ELEMENTS®-DRY
Reinforce LUX ELEMENTS ARM®
Mounting aids LUX ELEMENTS MONT®
LUX ELEMENTS®-...-PLUS Individual, special manufacture for each product group
In addition to standard products, also individually tailored and specially manufactured products are available for the products groups listed under the designation ‘PLUS‘.
Sizes, shapes, thicknesses etc., that deviate from standard features can be inquired from LUX ELEMENTS. After successful verification of implementation possibility at LUX ELEMENTS an appropriate offer will be prepared. Once an order is placed, it will be manufactured and delivered accordingly.
Overview of All Issues
LUX ELEMENTS GmbH & CO KGAn der Schusterinsel 7D - 51379 Leverkusen-OpladenTelefon +49 (0) 21 71/ 72 12 - 0Telefax +49 (0) 21 71/ 72 12 40
Point drainage –LUX ELEMENTS®-TUB
Appropriate floor drain system
Linear drainage –LUX ELEMENTS®-TUB-LINE
Appropriate floor drain system
Accessories –LUX ELEMENTS®- TUB/TUB-LINE
Further areas of applicationLUX ELEMENTS®-TUB
Trade fair dates
Floor channel drain (70 x 650 mm or 70 x 750 mm or 70 x 850 mm) with integrated horizontal drain support, with odour trap, integrated in extra flat hard foam support element, including sealing sleeve.
TUB-LINE COMBI RT 900 (650)TUB-LINE COMBI RT 900 (750)Floor channel drain with integrated horizontal drain support, including sealing sleeve
TUB-LINE COMBI GK R1 1200/900Gradient element, sealed
TUB-LINE COMBI RT 1200 (850)Floor channel drain with integrated horizontal drain support, including sealing sleeve
TUB-LINE COMBI GK Q1 1200Gradient element, sealed
TUB-LINE COMBI AE 900/1200 Connecting element
See also:TUB-LINE-COMBI - Linear drainageTUB-COMBI - Point drainage
A separate, retrofittable odour, foam and vermin barrier can be used instead of the odour trap (TUB-LINE-BAZ STOP).
The cover rail and a loose frame as a tiling aid are made of brushed stainless steel. Height adjustability for optimal adaptation to a covering thickness of 5–17 mm possible.
This product is particularly suitable where no large installation height is possible, e.g. when renovating old buildings. Drain performance: 0,52 l/s.
All TUB-LINE COMBI RT models can be combined with optionally available connecting elements. These connecting elements are reinforced at the surface and are used for the safe covering of the drain pipe. A suitable HTK elbow with swivel joint, which can be adjusted to an angle of 0–87°, is available as an accessory
Optionally available are matching sealed gradient elements for all TUB-LINE COMBI RT. They can be attached to one or both sides. If necessary, they can be cut to size on the higher side to adapt them e.g. to a niche.
Please note: Dimensions in mm. Measures without adhesive coating and tiles.
Please note: The design of descending gradients and directions belongs to planning services.
1. Depending upon the routing of the pipe, the connecting element (TUB-LINE COMBI AE) is cut to length with a cutter.
2. After fitting the drain pipe by means of the HTK elbow, the pipe is covered safely by the connecting element.
3. Installation is possible both on the wall side and ...
4. on the room side, depending on the routing of the pipe.
The system offers two design options due to a reversible channel cover rail. One side has a brushed stainless steel surface, the other can be tiled to match the entire shower base.
By simply turning, the desired side faces upwards.
Separately provided adapters that can be cut as required enable height adjustability of the channel for surface covering thicknesses from 5 to 17 mm.
The floor drain support is firmly fixed to the channel by means of a strong clip technique. This ensures a high degree of reliability with regard to leak tightness.
Drain system with high flow rate.Drain performance [l/s] in accordance with DIN EN 1253 [l/s]
Complete set mounting accessories on offer for all sizes of flush with the floor shower bases.
Shower receptor units LUX ELEMENTS - TUB >= 1200 x 1200 mm DIN CERTO - P1B036 (1008 KB)
Shower receptor units LUX ELEMENTS - TUB >= 1500 x 1500 mmDIN CERTO - P1B037 (1013 KB)
Before printing a pdf file, please check if this is really necessary. Environmental protection concerns us all.
To view the PDF documents you will need either the Acrobat Reader or a PDF-Viewer, both available free of charge. Using these programs the PDF documents can be opened, viewed and printed.
TUB Design grates made of stainless steel
TUB − Flush with the floor showers for every bathroom
Flush with the floor shower base TUB-PUMP with integrated floor drain pump
Flush with the floor shower bases TUB for the substitution of bathtubs
Extra-flat shower bases and channel support TUB-COMBI
TUB-LINE − Flush with the floor shower bases for the use on wooden floors
Flush with the floor shower bases TUB-H on wooden floors
Flush with the floor shower bases TUB-LINE with channel drain
Flush with the floor shower base TUB-PUMP with floor drain pump
Hard foam shower drain element TUB-WALL with integrated wall drain
© 2018 All rights reserved. We reserve the right to make technical changes.Status: Apr 06,2018
LUX ELEMENTS GmbH & CO KGAn der Schusterinsel 7D - 51379 Leverkusen-OpladenGermanyTelefon +49 (0) 21 71/ 72 12 - 0Telefax +49 (0) 21 71/ 72 12 40