LUX ELEMENTS offers all components for the entire shower area: starting from the construction panel for wall and floor installation over the shower base through to all required sealing materials for the transitions. All in all, this results in a perfectly coordinated and tested system.
The advantages for the installer are:
- High degree of safety
- Construction and sealing in one
General design of a shower area using
LUX ELEMENTS®- ELEMENT-EL
1. TUB – Floor structure with shower base flush with the floor,
factory sealing
2. ELEMENT-EL – wall structure on masonry, concrete or plaster,
wooden or metal stud frame or free-standing with waterproof
construction panel.
3. ELEMENT-EL – Floor structure on wooden floor or mineral substrate
Further requirements regarding sealing elements must be taken into
consideration in accordance with national directives (see also: 
types
of seals).
General design of a shower area using
LUX ELEMENTS®- ELEMENT-VK
1 TUB – Floor structure with shower base flush with the floor,
factory sealing
2 ELEMENT-VK – Wall structure on masonry, concrete or plaster,
wooden or metal stud frame or free-standing with waterproof
construction panel.
3 ELEMENT-VK – Floor structure on wooden floor or mineral substrate
Further requirements regarding sealing elements must be taken into
consideration in accordance with national directives (see also: types
of seals).
The installation is very easy. Please take a look here:
- Practical instructions
-
The basis
Quality with the environment in mind
Working with hard foam support elements
The tools
Recommended cutting techniques for the ELEMENT construction panel
LUX ELEMENTS®- ELEMENT EL
LUX ELEMENTS®- ELEMENT-SL / SQ
Bending radii, slit spacings, dimensions of pre-slit hard foam
Processing instructions with slit panels
LUX ELEMENTS®- ELEMENT-VK
General processing instructions
Processing tips
The following materials are suitable for cladding hard foam support elements
- Application areas
-
Walls in interior areas
Attaching to masonry, concrete or plaster with mortar
Wall levelling over existing tile coverings
The multi-functional construction panel: application on the wall (example)
Application on free-standing metalsupports
The multi-functional construction panel: application on metal stud frame (example)
Wall-mounted elements
The creation of a levelling construction
Planking of a support construction
Floor applications
Application on beton or screed
Application on wooden floor boards
Application on the floor
The multi-functional construction panel: on mineral substrate (example)
Floor shower base
Connection to a shower area
- Construction & design
-
With straight panels
Partition walls or room dividers
With slit panels
- Practical examples
- Product
- Datasheets
-
LUX ELEMENTS®- ELEMENT-EL (411 KB) LUX ELEMENTS®- ELEMENT-SL/SQ 30, 50, 80 (134 KB) LUX ELEMENTS®- ELEMENT-VK (411 KB)
- Safety Data Sheets
-
- Installation instructions
- Product & packaging specs
- Systemcomponents
- The tried and tested accessories are fully harmonised for processing ELEMENT. Specially developed adhesives and mortars, sealing tapes, mounting angles and plugs ensure problem-free processing.
LUX ELEMENTS®- ARM: Reinforcement fabric LUX ELEMENTS®- COL: Adhesives LUX ELEMENTS®- DRY: Sealing filler and sealing tapes LUX ELEMENTS®- FIX: Fastening sets and plugs/exterior LUX ELEMENTS®- MONT: Mounting aids
Before printing a pdf file, please check if this is really necessary.
Environmental protection concerns us all.
To view the PDF files, you will need Acrobat Reader that you can download here free-of-charge. This program will enable you to open, view and print out these documents in PDF format.
