Shower base with integrated wall drain – TUB-WALL

TUB-WALL are hard foam shower base elements in two widths with integrated wall drain, including stainless steel cover, odour trap (sealing water height 22 mm) and loose sealing sleeve. 

The drain cover can be tiled and thus blends almost ‘invisibly’ into the wall design. Drain performance: 0,52 l/s.

Through the relocation of the drain into the wall, the shower drain elements allow a continuous floor surface.

no-img

TUB-WALL RT 1 900/200
with integrated wall drain with 1-sided gradient

no-img

TUB-WALL RT 1 1200/200
with integrated wall drain with 1-sided gradient

TUB-WALL RT 1 H 1200/200
with integrated wall drain and loose sealing sleeve, single-sided gradient, for use on wooden floor constructions

no-img

TUB-WALL RT 3 900/200
with integrated wall drain with 3-sided gradient

no-img

TUB-WALL RT 3 1200/200
with integrated wall drain with 3-sided gradient

In order to enable a wide selection of tiles and ceramics for the surface design, TUB-WALL is available with both a single-sided and a 3-sided gradient.

Matching gradient elements

Single-sided gradient

TUB-LINE COMBI GK

Optionally available are matching sealed gradient elements TUB-LINE COMBI GK... for all TUB-WALL shower drain elements.

If necessary, they can be cut to size on the higher side. Like the slope variants for the floor drain elements, the gradient elements are also equipped with single-sided and 3-sided gradient.



in case of TUB-WALL RT 1 H: 20 mm

3-sided gradient

 

 

 

 

 

 

 

 

 

 

Dimensions in mm

For the use on wooden sub-constructions

TUB-WALL RT 1 H 1200/200
– for use on wooden floor constructions 20 mm-high hard foam shower drain element with integrated wall drain, single-sided slope, including tileable stainless steel cover, odour trap and loose sealing sleeve.

Available bench

RELAX-BA-SOLO-G-W 900
to fit TUB-WALL RT 1 900/200 or TUB-WALL RT 3 900/200

Mounting accessories (KITs)

Complete set mounting accessories on offer for all sizes of flush with the floor shower bases.

Product specifications

Shower receptor units LUX ELEMENTS - TUB >= 1200 x 1200 mm
DIN CERTO - P1B036 (1008 KB)

Shower receptor units LUX ELEMENTS - TUB >= 1500 x 1500 mm
DIN CERTO - P1B037 (1013 KB)


Before printing a pdf file, please check if this is really necessary. Environmental protection concerns us all.

To view the PDF documents you will need either the Acrobat Reader or a PDF-Viewer, both available free of charge. Using these programs the PDF documents can be opened, viewed and printed.