Apatent application was made in 1981 for the earth shattering invention of "the original – LUX ELEMENTS® hard foam support ELEMENT".
The construction panel for walls and floors LUX ELEMENTS®-ELEMENT
The installation cladding LUX ELEMENTS®-TEC
Bath surrounds LUX ELEMENTS®-TOP
The washstands LUX ELEMENTS®-LAVADO
Point drainage LUX ELEMENTS TUB®
Linear drainage LUX ELEMENTS TUB-LINE®
Further areas of application LUX ELEMENTS TUB®
Individual relaxation and distraction LUX ELEMENTS®-RELAX
Prefabricated room constructions LUX ELEMENTS®-MODUL
The decorative elements LUX ELEMENTS®-DECO
Individual room constructions LUX ELEMENTS®-CONCEPT
The tried and tested accessories are fully harmonised for processing ELEMENT. Specially developed adhesives and mortars, sealing tapes, mounting angles and plugs ensure problem-free processing.
Fastening sets and dowels / Technical accessories LUX ELEMENTS®-FIX
Adhesives LUX ELEMENTS COL®
Sealing filler and sealing tapes LUX ELEMENTS®-DRY
Reinforce LUX ELEMENTS ARM®
Mounting aids LUX ELEMENTS MONT®
LUX ELEMENTS®-...-PLUS Individual, special manufacture for each product group
In addition to standard products, also individually tailored and specially manufactured products are available for the products groups listed under the designation ‘PLUS‘.
Sizes, shapes, thicknesses etc., that deviate from standard features can be inquired from LUX ELEMENTS. After successful verification of implementation possibility at LUX ELEMENTS an appropriate offer will be prepared. Once an order is placed, it will be manufactured and delivered accordingly.
Overview of All Issues
LUX ELEMENTS GmbH & CO KGAn der Schusterinsel 7D - 51379 Leverkusen-OpladenTelefon +49 (0) 21 71/ 72 12 - 0Telefax +49 (0) 21 71/ 72 12 40
Point drainage –LUX ELEMENTS®-TUB
Appropriate floor drain system
Linear drainage –LUX ELEMENTS®-TUB-LINE
Appropriate floor drain system
Accessories –LUX ELEMENTS®- TUB/TUB-LINE
Further areas of applicationLUX ELEMENTS®-TUB
Drainage technology and accessories.
Floor drain support DN 50, vertical for TUB-LINE, for 160 mm core drill hole, without odour trap
Drain performance in accordance with DIN EN 1253[l/s]: 0,8 l/s
TUB-LINE BA-W 22
Floor drain support DN 50, horizontal for TUB-LINE, without odour trap.
TUB-LINE BA-W 50 Floor drain support DN 50horizontal, without odour trap.
TUB-LINE BA-GV 50 Odour trap, sealing water height 50 mm, to fit TUB LINE BA-W 50
TUB-LINE BAZ STOP
Odour, foam and vermin barrier; can also be retrofitted to existing installed channel drains for the design variants TUB-LINE.
The drain is prevented from drying out by the tightly sealing cap, thus also preventing the formation of unpleasant odours.
Removable hair trap for TUB-LINE. Reliably collects hair and dirt and prevents any blockage in the drain pipe.
TUB-BAZ DN 50/40
Reducer, DN 50 to DN 40, with lip seal.
Adaptor, DN 50 to British Standard BST.
Elbow, DN 50, swivel joint 0–87° (infinitely variable). Due to integrated swivel joint, replaces six conventional HT elbows from 0 to 87°, hence significantly reducing stockkeeping. Simple and fast assembly.
TUB-LINE BA-S FIRE STOP
Floor drain support DN 50 vertical for 160 mm core drill hole, with odour trap, incl. grate fitting frame made of ABS and standard stainless steel grate, incl. adaptor part TUB-BAZ VER and fire-protection component (sealing water height 50 mm).
Conduit seal for core drill hole in diameter 160 mm, with fire protection in conjunction with TUB-LINE BA-S FIRE STOP
TUB-TSM 6Impact sound insulating mat1250 x 1250 x 6 mm
Impact sound insulating mat for the reduction of noise nuisance caused by running water, e.g. in apartment blocks, nursing homes and hotels.
TUB-TSM 12Impact sound insulating mat1250 x 1250 x 12 mm
Impact sound insulating mat for LUX ELEMENTS flush with the floor shower base elements, for elevated requirements.
Complete set mounting accessories on offer for all sizes of flush with the floor shower bases.
Shower receptor units LUX ELEMENTS - TUB >= 1200 x 1200 mm DIN CERTO - P1B036 (1008 KB)
Shower receptor units LUX ELEMENTS - TUB >= 1500 x 1500 mmDIN CERTO - P1B037 (1013 KB)
Before printing a pdf file, please check if this is really necessary. Environmental protection concerns us all.
To view the PDF documents you will need either the Acrobat Reader or a PDF-Viewer, both available free of charge. Using these programs the PDF documents can be opened, viewed and printed.
TUB Design grates made of stainless steel
TUB − Flush with the floor showers for every bathroom
Flush with the floor shower base TUB-PUMP with integrated floor drain pump
Flush with the floor shower bases TUB for the substitution of bathtubs
Extra-flat shower bases and channel support TUB-COMBI
Flush with the floor shower bases TUB-H on wooden floors
TUB-LINE − Flush with the floor shower bases for the use on wooden floors
Flush with the floor shower bases TUB-LINE with channel drain
Flush with the floor shower bases including surface element – TUB-LINE FINISH
Flush with the floor shower base TUB-PUMP with floor drain pump
Hard foam shower drain element TUB-WALL with integrated wall drain
© 2020 All rights reserved. We reserve the right to make technical changes.Status: Feb 10,2020
LUX ELEMENTS GmbH & CO KGAn der Schusterinsel 7D - 51379 Leverkusen-OpladenGermanyTelefon +49 (0) 21 71/ 72 12 - 0Telefax +49 (0) 21 71/ 72 12 40