Apatent application was made in 1981 for the earth shattering invention of "the original – LUX ELEMENTS® hard foam support ELEMENT".
The construction panel for walls and floors LUX ELEMENTS®-ELEMENT
The installation cladding LUX ELEMENTS®-TEC
Bath surrounds LUX ELEMENTS®-TOP
The washstands LUX ELEMENTS®-LAVADO
Point drainage LUX ELEMENTS TUB®
Linear drainage LUX ELEMENTS TUB-LINE®
Further areas of application LUX ELEMENTS TUB®
Individual relaxation and distraction LUX ELEMENTS®-RELAX
Prefabricated room constructions LUX ELEMENTS®-MODUL
The decorative elements LUX ELEMENTS®-DECO
Individual room constructions LUX ELEMENTS®-CONCEPT
The tried and tested accessories are fully harmonised for processing ELEMENT. Specially developed adhesives and mortars, sealing tapes, mounting angles and plugs ensure problem-free processing.
Fastening sets and dowels LUX ELEMENTS®-FIX
Adhesives LUX ELEMENTS COL®
Sealing filler and sealing tapes LUX ELEMENTS®-DRY
Reinforce LUX ELEMENTS ARM®
Mounting aids LUX ELEMENTS MONT®
LUX ELEMENTS®-...-PLUS Individual, special manufacture for each product group
In addition to standard products, also individually tailored and specially manufactured products are available for the products groups listed under the designation ‘PLUS‘.
Sizes, shapes, thicknesses etc., that deviate from standard features can be inquired from LUX ELEMENTS. After successful verification of implementation possibility at LUX ELEMENTS an appropriate offer will be prepared. Once an order is placed, it will be manufactured and delivered accordingly.
Overview of All Issues
LUX ELEMENTS GmbH & CO KGAn der Schusterinsel 7D - 51379 Leverkusen-OpladenTelefon +49 (0) 21 71/ 72 12 - 0Telefax +49 (0) 21 71/ 72 12 40
Construction panel for walls, floors und design elementsLUX ELEMENTS®-ELEMENT
Installation claddingLUX ELEMENTS®-TEC
Bath and whirlpool surroundsLUX ELEMENTS®- TOP
WashstandsLUX ELEMENTS®- LAVADO
Trade fair dates
The installation of LAVADO-FLOAT is possible not only on masonry but also on stud frames – quickly, easily and reliably.
The LAVADO-FLOAT models are panels made of hard foam support material, which can be individually tiled.
Two stainless steel brackets ensure stable suspension. The washstands can be shortened at the sides, which enables them to be adapted to smaller bathrooms. The construction of a row of washstands is also possible by means of arranging and gluing together several washstands.
Conventional stem valves e.g. Viega Visign V1 are suitable for the drain connection of the types with point drainage.
A clickfit drain adaptor for the connection of the floor drain is included with the product set of the types with linear drainage.
1. Hard foam support element with fabric coating
2. Basin recess with built-in slope*
3. Assembly openingsfor the simple assembly of drain and taps*
4. Plastic reinforcement with drill hole for tap and drain/ also suitable for three-hole taps*
5. Drilled holes for flexible use of the stainless steel brackets
6. Stainless steel bracket with sturdy mounting plate
7. Plastic reinforcement
Before printing a pdf file, please check if this is really necessary. Environmental protection concerns us all.
To view the PDF documents you will need either the Acrobat Reader or a PDF-Viewer, both available free of charge. Using these programs the PDF documents can be opened, viewed and printed.
Wash stands LAVADO with a "floating" design
© 2018 All rights reserved. We reserve the right to make technical changes.Status: May 21,2018
LUX ELEMENTS GmbH & CO KGAn der Schusterinsel 7D - 51379 Leverkusen-OpladenGermanyTelefon +49 (0) 21 71/ 72 12 - 0Telefax +49 (0) 21 71/ 72 12 40