Steam inlet – ADD-TE DE...
Support panel with hole for a steam inlet, integrated in a steam bath construction as surcharge („TI”) or single, in a hard foam support element 300 x 300 mm („TE”)
Steam inlet – ADD-TE DE...
Support panel with hole for a steam inlet, integrated in a steam bath construction as surcharge („TI”) or single, in a hard foam support element 300 x 300 mm („TE”)
Installation panel – ADD-TE IPA-I/V iBox from Hansgrohe plus the associated fittings; all connections are pressed and tested.
Acceptance of an LED spot mounting sleeve (WDT) –
ADD-TE AF
Milling in hard foam support element for on-site mounting of the sealing flange for WDT Spot integrated sleeve, as surcharge
ADD-TE AI
Sealing flange in hard foam support element, factoryintegrated, for the mounting of a WDT Spot integrated sleeve, as surcharge
Acceptance of a empty conduit –
ADD-TE LF
Milling in the hard foam support element for the on-site mounting of an empty conduit (diameter 25 or 32 mm) with loose ELEMENT-EL 4 cover, as surcharge
ADD-TE LI
Empty conduit (diameter 25 or 32 mm), factory-integrated in hard foam support element and sealed with ELEMENT-EL 4, as surcharge
Acceptance of a flush-mounted socket
ADD-TE UF-S ... UF-XL
Milling in hard foam support element for on-site mounting of the WDT flush-mounting box, as surcharge:
ADD-TE UI-S ... UI-XL
Flush-mounting box (manufacturer: WDT), factory-integrated in hard foam support element, as surcharge:
ADD-TE UF-S /ADD-TE UI-S WDT flush-mounting box