Apatent application was made in 1981 for the earth shattering invention of "the original – LUX ELEMENTS® hard foam support ELEMENT".
The construction panel for walls and floors LUX ELEMENTS®-ELEMENT
The installation cladding LUX ELEMENTS®-TEC
Bath surrounds LUX ELEMENTS®-TOP
The washstands LUX ELEMENTS LAVADO®
Point drainage LUX ELEMENTS TUB®
Linear drainage LUX ELEMENTS TUB-LINE®
Wellness LUX ELEMENTS®-RELAX
Prefabricated room constructions LUX ELEMENTS®-MODUL
The decorative elements LUX ELEMENTS®-DECO
Individual room constructions LUX ELEMENTS®-CONCEPT
The tried and tested accessories are fully harmonised for processing ELEMENT. Specially developed adhesives and mortars, sealing tapes, mounting angles and plugs ensure problem-free processing.
Fastening sets and dowels LUX ELEMENTS®-FIX
Adhesives LUX ELEMENTS COL®
Sealing filler and sealing tapes LUX ELEMENTS®-DRY
Reinforce LUX ELEMENTS ARM®
Mounting aids LUX ELEMENTS MONT®
LUX ELEMENTS®-...-PLUS Individual, special manufacture for each product group
In addition to standard products, also individually tailored and specially manufactured products are available for the products groups listed under the designation ‘PLUS‘.
Sizes, shapes, thicknesses etc., that deviate from standard features can be inquired from LUX ELEMENTS. After successful verification of implementation possibility at LUX ELEMENTS an appropriate offer will be prepared. Once an order is placed, it will be manufactured and delivered accordingly.
Overview of All Issues
LUX ELEMENTS GmbH & CO KGAn der Schusterinsel 7D - 51379 Leverkusen-Opladen+49 (0) 21 71/ 72 12 - 0 (tel)+49 (0) 21 71/ 72 12 40 (fax)
Prosol Distribution Inc. 165 Rue Deslauriers H4N 2S4 St-Laurent, Québec 001 514 745 1212 (tel) 001 514 745 1215 (fax) firstname.lastname@example.org http://www.prosol.ca/
Construction panel for walls, floors und design elementsLUX ELEMENTS®-ELEMENT
Installation claddingLUX ELEMENTS®-TEC
Bath and whirlpool surroundsLUX ELEMENTS®- TOP
WashstandsLUX ELEMENTS®- LAVADO-FLOAT
TEC are prefabricated cladding elements made of polystyrene hard foam with mortar coating and glass fibre fabric on both sides. Suitable for vertical and horizontal claddings in corners or on straight surfaces.
TEC-KA BSAngular pipe cladding element
TEC-U BSU-shaped pipe cladding element
TEC-SK BSwith adhesive groove for angular shape
In corners or on straight surfaces
TEC cladding elements can be used in wet rooms, living areas, in the basement or in the attic storey, e.g. for cladding of
Pipe cladding element for angular shape, with groove, coated and reinforced on both sides. The groove is equipped with a self-adhesive strip. When the protective film is pulled off, the element can be folded up to form an angle and is fixed.
TEC cladding elements can be used everywhere in interior decoration. Installation is simple and fast.
Before printing a pdf file, please check if this is really necessary. Environmental protection concerns us all.
To view the PDF documents you will need either the Acrobat Reader or a PDF-Viewer, both available free of charge. Using these programs the PDF documents can be opened, viewed and printed.
TEC cladding elements for pipes and wall-mounted constructions
TEC pipe cladding for tiles or plaster
Cladding of wall-mounted constructions TEC-VWD
© 2021 All rights reserved. We reserve the right to make technical changes.Status: Jun 09,2021
Prosol Distribution Inc.
165 Rue Deslauriers
H4N 2S4 St-Laurent, Québec
001 514 745 1212 (tel)
001 514 745 1215 (fax)