Seat variant in “floating” design – CONCEPT-BA-FLOAT

The CONCEPT-BA-FLOAT is a tileable seat variant in “floating” design, which makes the optical impression of more space, due to its filigree construction.


floating, straight, incl. stainless steel framework


floating, straight, incl. stainless steel framework from for corner element

The assembly of the bench takes place by way of a flexible, adaptable stainless steel substructure (straight or with corner elements).

A circumferential distance from the wall is maintained to allow the water to drain off.

The bench seat is made to measure corresponding with the wall construction. Equipping with electric heating and/or indirect lighting is optionally possible.

The assembly

The assembly of the stainless steel substructure for CONCEPT-BA- FLOAT into the CONCEPT-WA… wall construction takes place via factory-made notches in the corner elements.

For this, a seat height of 41,5 cm · 1 5/8" is predefined (other heights possible upon request).

Hard foam filler elements are enclosed for the later covering of the cutouts .

Bench form – CONCEPT-BA-FLOAT-G…

Bench form FLOAT, straight, between two walls, incl. stainless steel substructure.

  • CONCEPT-BA-FLOAT-GK from 1500 to 2100 mm · 59 1/16" to 82 11/16"

  • CONCEPT-BA-FLOAT-GL from 2100 to 3000 mm · 82 11/16" to 9' 10 1/8"

Corner elements – CONCEPT-BA-FLOAT-E…

Complementary to FLOAT-G… : Bench form FLOAT, straight, incl. stainless steel substructure for corner elements

  • CONCEPT-BA-FLOAT-EK from 1500 to 2100 mm · 59 1/16" to 82 11/16"
  • CONCEPT-BA-FLOAT-EL from 2100 to 3000 mm · 82 11/16" to 9' 10 1/8"


An optional light strip enables indirect LED lighting underneath the bench seat CONCEPT-BA-FLOAT (surcharge).

The scope of delivery includes:

  • A control unit including radio remote control, by means of which different colours and colour change programs can be set.

  • Prefabrication of the underside of MODUL-BA-FLOAT: the seat support is fitted in the factory with a profile for mounting the light strip. A clamping mechanism enables easy insertion of the light strip and also later removal, e.g. for maintenance. The light strip consists of an aluminium U-profile housing with IP 65 protection and is thus protected against moisture.

Electric heating – CONCEPT-BA-EH

Electric heating set, integrated and embedded in filler at the factory, with temperature sensor and temperature regulator for bench form FLOAT, individually made to measure (surcharge).

Product specifications

Bevor Sie ein PDF ausdrucken, prüfen Sie bitte, ob dies wirklich nötig ist. Umweltschutz geht uns alle an. Zum Betrachten der PDF-Dokumente benötigen Sie entweder den kostenlosen Acrobat Reader oder einen freien PDF-Viewer. Mit Hilfe dieser Betrachterprogramme können die PDF-Dokumente geöffnet, angeschaut und gedruckt werden.

powered by webEdition CMS