Apatent application was made in 1981 for the earth shattering invention of "the original – LUX ELEMENTS® hard foam support ELEMENT".
The construction panel for walls and floors LUX ELEMENTS®-ELEMENT
The installation cladding LUX ELEMENTS®-TEC
Bath surrounds LUX ELEMENTS®-TOP
The washstands LUX ELEMENTS LAVADO®
Point drainage LUX ELEMENTS TUB®
Linear drainage LUX ELEMENTS TUB-LINE®
Wellness LUX ELEMENTS®-RELAX
Prefabricated room constructions LUX ELEMENTS®-MODUL
The decorative elements LUX ELEMENTS®-DECO
Individual room constructions LUX ELEMENTS®-CONCEPT
The tried and tested accessories are fully harmonised for processing ELEMENT. Specially developed adhesives and mortars, sealing tapes, mounting angles and plugs ensure problem-free processing.
Fastening sets and dowels LUX ELEMENTS®-FIX
Adhesives LUX ELEMENTS COL®
Sealing filler and sealing tapes LUX ELEMENTS®-DRY
Reinforce LUX ELEMENTS ARM®
Mounting aids LUX ELEMENTS MONT®
LUX ELEMENTS®-...-PLUS Individual, special manufacture for each product group
In addition to standard products, also individually tailored and specially manufactured products are available for the products groups listed under the designation ‘PLUS‘.
Sizes, shapes, thicknesses etc., that deviate from standard features can be inquired from LUX ELEMENTS. After successful verification of implementation possibility at LUX ELEMENTS an appropriate offer will be prepared. Once an order is placed, it will be manufactured and delivered accordingly.
Overview of All Issues
LUX ELEMENTS GmbH & CO KGAn der Schusterinsel 7D - 51379 Leverkusen-Opladen+49 (0) 21 71/ 72 12 - 0 (tel)+49 (0) 21 71/ 72 12 40 (fax)
Prosol Distribution Inc. 165 Rue Deslauriers H4N 2S4 St-Laurent, Québec 001 514 745 1212 (tel) 001 514 745 1215 (fax) email@example.com http://www.prosol.ca/
Current trade fair dates
Suitable tools are hand saw, angle grinder and jack saw. A cutter can also be used for thinner ELEMENT construction panels (e.g. EL 4 – EL 10).
(e.g. for pipe ducts) – first cut the fabric down into the foam with cutter. Afterwards the hard foam can be scraped off e.g. with a cross slot screwdriver.
If an absolutely even gluing surface is required, the edges of the hard foam support element should first be ground. For this, use an emery board.
(with cartridge adhesives) – application on ELEMENT joints, uncoated edges. We recommend a snake-shaped application of cartridge adhesives.
To achieve optimal adhesive distribution, the ELEMENT construction panels are rubbed against one another slightly when placed together.
with FIX/pre-piercing Use FIX-SD to hold the ELEMENT construction panels in position while the adhesive is drying. We recommend the pre-piercing of the dowel holes with a cross slot screwdriver.
The fixing adhesive COL-AK can be variably used
Before applying the adhesive, prepierce the holes for e.g. hammer fix plugs FIX-FID with a cross slot screwdriver.
All ELEMENT construction panels must be stored lying down straight in a dry place. If an ELEMENT construction panel should be slightly warped due to improper storage or other reasons, they can usually be straightened by light bending and pressing. Do not bring ELEMENT construction panels into contact with substances containing solvents.
© 2019 All rights reserved. We reserve the right to make technical changes.Status: Sep 02,2019
Prosol Distribution Inc.
165 Rue Deslauriers
H4N 2S4 St-Laurent, Québec
001 514 745 1212 (tel)
001 514 745 1215 (fax)