Apatent application was made in 1981 for the earth shattering invention of "the original – LUX ELEMENTS® hard foam support ELEMENT".
The construction panel for walls and floors LUX ELEMENTS®-ELEMENT
The installation cladding LUX ELEMENTS®-TEC
Bath surrounds LUX ELEMENTS®-TOP
The washstands LUX ELEMENTS LAVADO®
Point drainage LUX ELEMENTS TUB®
Linear drainage LUX ELEMENTS TUB-LINE®
Wellness LUX ELEMENTS®-RELAX
Prefabricated room constructions LUX ELEMENTS®-MODUL
The decorative elements LUX ELEMENTS®-DECO
Individual room constructions LUX ELEMENTS®-CONCEPT
The tried and tested accessories are fully harmonised for processing ELEMENT. Specially developed adhesives and mortars, sealing tapes, mounting angles and plugs ensure problem-free processing.
Fastening sets and dowels LUX ELEMENTS®-FIX
Adhesives LUX ELEMENTS COL®
Sealing filler and sealing tapes LUX ELEMENTS®-DRY
Reinforce LUX ELEMENTS ARM®
Mounting aids LUX ELEMENTS MONT®
LUX ELEMENTS®-...-PLUS Individual, special manufacture for each product group
In addition to standard products, also individually tailored and specially manufactured products are available for the products groups listed under the designation ‘PLUS‘.
Sizes, shapes, thicknesses etc., that deviate from standard features can be inquired from LUX ELEMENTS. After successful verification of implementation possibility at LUX ELEMENTS an appropriate offer will be prepared. Once an order is placed, it will be manufactured and delivered accordingly.
Overview of All Issues
LUX ELEMENTS GmbH & CO KGAn der Schusterinsel 7D - 51379 Leverkusen-Opladen+49 (0) 21 71/ 72 12 - 0 (tel)+49 (0) 21 71/ 72 12 40 (fax)
Prosol Distribution Inc. 165 Rue Deslauriers H4N 2S4 St-Laurent, Québec 001 514 745 1212 (tel) 001 514 745 1215 (fax) email@example.com http://www.prosol.ca/
Current trade fair dates
As an alternative to tiles, the application of plasters and fillers on hard foam support elements is possible if impact loads can be ruled out.
The specifications of the respective manufacturers must be observed.
NOTE: The joints of ELEMENT construction panels must always be previously reinforced with ARM 100.
The same material is generally always used for production; whether the client later applies large-sized tiles or mosaic. The later type of use must be taken into consideration by the architect or tiler during the planning phase, because it is then that a decision is made as to whether mosaic is possible or not. In case of horizontal application we recommend e.g. a size of at least 10 x 10 cm · 39 3/8" x 39 3/8" is used for wheelchairs or walking frames, due to the high pressure load resulting from such use. Mosaic can be used in conventional household applications, as our material absorbs a pressure load of at least 0.1 N/mm2.
We recommend the use of our COL products. For mosaic, marble and other materials, please contact us for information.
Please also observe our data sheets and the table "Sealing, bonding, and jointing of LUX ELEMENTS®-products for small mosaics and tiles".
© 2019 All rights reserved. We reserve the right to make technical changes.Status: Sep 02,2019
Prosol Distribution Inc.
165 Rue Deslauriers
H4N 2S4 St-Laurent, Québec
001 514 745 1212 (tel)
001 514 745 1215 (fax)