Apatent application was made in 1981 for the earth shattering invention of "the original – LUX ELEMENTS® hard foam support ELEMENT".
The construction panel for walls and floors LUX ELEMENTS®-ELEMENT
The installation cladding LUX ELEMENTS®-TEC
Bath surrounds LUX ELEMENTS®-TOP
The washstands LUX ELEMENTS LAVADO®
Point drainage LUX ELEMENTS TUB®
Linear drainage LUX ELEMENTS TUB-LINE®
Wellness LUX ELEMENTS®-RELAX
Prefabricated room constructions LUX ELEMENTS®-MODUL
The decorative elements LUX ELEMENTS®-DECO
Individual room constructions LUX ELEMENTS®-CONCEPT
The tried and tested accessories are fully harmonised for processing ELEMENT. Specially developed adhesives and mortars, sealing tapes, mounting angles and plugs ensure problem-free processing.
Fastening sets and dowels LUX ELEMENTS®-FIX
Adhesives LUX ELEMENTS COL®
Sealing filler and sealing tapes LUX ELEMENTS®-DRY
Reinforce LUX ELEMENTS ARM®
Mounting aids LUX ELEMENTS MONT®
LUX ELEMENTS®-...-PLUS Individual, special manufacture for each product group
In addition to standard products, also individually tailored and specially manufactured products are available for the products groups listed under the designation ‘PLUS‘.
Sizes, shapes, thicknesses etc., that deviate from standard features can be inquired from LUX ELEMENTS. After successful verification of implementation possibility at LUX ELEMENTS an appropriate offer will be prepared. Once an order is placed, it will be manufactured and delivered accordingly.
Overview of All Issues
LUX ELEMENTS GmbH & CO KGAn der Schusterinsel 7D - 51379 Leverkusen-Opladen+49 (0) 21 71/ 72 12 - 0 (tel)+49 (0) 21 71/ 72 12 40 (fax)
Prosol Distribution Inc. 165 Rue Deslauriers H4N 2S4 St-Laurent, Québec 001 514 745 1212 (tel) 001 514 745 1215 (fax) email@example.com http://www.prosol.ca/
Current trade fair dates
Glue the wall fitting on with COL-PU or COL-AK (depending on the substrate), cut from residual material. Additionally fix with suitable dowels. Glue on top plate of ELEMENT-EL 100 with COL-PU, fix with FIX-SD 130.
Saw the font cladding to size from ELEMENT-EL 30 and provide with a cut-out.
Cut the shaped parts for the shelf, glue together with COL-MK and glue to the front cladding element.
Glue the finished front cladding with COL-PU to the cover plate, also the side plates from ELEMENT-EL 30. Additionally fix everything with FIX-SD 80.
TIP: Pre-pierce dowel holes using a cross slot screwdriver
Place shelf element side section from ELEMENT-EL 60 on the floor and mark the position of the shelves. Saw the shelves to size from ELEMENT-EL 100 and glue to the shelf element side section using COL-MK.
Also glue the second shelf element side section to the shelves with COL-MK.Additionally screw the side sections and shelves together with FIX-SD 80.
A rear wall made of ELEMENT-EL 20 can be installed in the same way.
Erect the finished shelving, glue to the wall and washstand substructure. Reinforce all element joints with LUX ELEMENTS®-ARM system components, then level out the reinforced points with COL-AK.
© 2019 All rights reserved. We reserve the right to make technical changes.Status: Sep 02,2019
Prosol Distribution Inc.
165 Rue Deslauriers
H4N 2S4 St-Laurent, Québec
001 514 745 1212 (tel)
001 514 745 1215 (fax)