LUX ELEMENTS®- COL-PU/MD - Adhesive for montage and sealing

COL-PU - Adhesive for montage

LUX ELEMENTS®-COL-PU is a moisture-hardening, 1-component polyurethane-based adhesive. COL-PU is suitable for the adhesion of LUX ELEMENTS® hard foam support elements one to another and also to wood, wood materials, various metals, stone, ceramic and plastic.

Adhesive for montage and sealingLUX ELEMENTS® Hartschaum-Trägerelemente

COL-MD - Adhesive for montage and sealing

LUX ELEMENTS®-COL-MD LUX is a 1-component Silane terminated polymer adhesive and sealant.

COL-MD is suitable for adhesion and sealing of  LUX ELEMENTS®-hard foam support elements in joint or structural connection areas, where DRY products cannot be used.

  • COL-MD adheres to many different substrates even without primer, even in the presence of water.
  • COL-MD is elastic when set; it is very suitable for situations where the adhesive has to compensate for tensions and stresses and in the presence of dynamic loads.
elastic when set
Datasheets

LUX ELEMENTS®- COL-PU - Adhesive for montage (27 KB)

Safety Data Sheets

Installation instructions

Product & packaging specs

LUX ELEMENTS®- COL (552 KB)

Systemcomponent for ...

LUX ELEMENTS®- ELEMENT:
The universal construction panel
LUX ELEMENTS®- FLOOR:
The construction panel for indoor floors
LUX ELEMENTS®- TWIN:
The uncoupling ?floating? system
LUX ELEMENTS®- TEC:
Pipe claddings
LUX ELEMENTS®- TOP:
Bath surrounds
LUX ELEMENTS®- TUB:
Shower units
LUX ELEMENTS®- RELAX:
LUX ELEMENTS®- DECO:
LUX ELEMENTS®- LAVO:
LUX ELEMENTS®- MODUL:


Before printing a pdf file, please check if this is really necessary. Environmental protection concerns us all.

To view the PDF files, you will need Acrobat Reader that you can download here free-of-charge. This program will enable you to open, view and print out these documents in PDF format.

 
... nach oben

© 2008 All rights reserved. We reserve the right to make technical changes.

back
KontaktformularPrint this page!